HOW TO INSTALL YOUR ZIPPEESHADE™
In order for you Zippee Shade to fit properly
you must follow these instructions
Once you have removed your ZippeeShade™ from it’s carrying case, you may notice that the UV Resistant fabric is wrinkled.
We recommend that you take a standard steam iron, and set it to the lowest setting yet allowing the steam to work. First iron the ZippeeShade™ on the silver side, so that you will not damage the printed logo. Once you have smoothed out all the wrinkles, you can turn the ZippeeShade™ over, and begin ironing the black side.
Be sure to iron the loose fabric that surrounds the frame.
To install the ZippeeShade™, slide back the mesh screen covering you sunroof, and slide the (SOLID SIDE) of ZippeeShade between the glass and mesh screen. For the rear sunroof: the loose fabric should be facing towards the rear hatchback. For the front sunroof: the loose fabric should be facing towards the front windshield.
Take the suction cups and depress them against the glass above.
Take the loose fabric and tuck it into the edges of sunroof trim ring. It’s that easy.