How to install your Zippeeshade

zippeegear | Instructions | February 11, 2011

HOW TO INSTALL YOUR ZIPPEESHADE™

Click here to download PDF file

In order for you Zippee Shade to fit properly

you must follow these instructions

Step 1:

Once you have removed your ZippeeShade™ from it’s carrying case, you may notice that the UV Resistant fabric is wrinkled.

Step 2:

We recommend that you take a standard steam iron, and set it to the lowest setting yet allowing the steam to work.  First iron the ZippeeShade™ on the silver side, so that you will not damage the printed logo.  Once you have smoothed out all the wrinkles, you can turn the ZippeeShade™ over, and begin ironing the black side.

Step 3:

Be sure to iron the loose fabric that surrounds the frame.

Step 4:

To install the ZippeeShade™, slide back the mesh screen covering you sunroof, and slide the (SOLID SIDE) of ZippeeShade between the glass and mesh screen.  For the rear sunroof: the loose fabric should be facing towards the rear hatchback.  For the front sunroof: the loose fabric should be facing towards the front windshield.

Step 5:

Take the suction cups and depress them against the glass above.

Step 6:

Take the loose fabric and tuck it into the edges of sunroof trim ring.  It’s that easy.